Multitech MT4X56USB Guida Utente Pagina 43

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 42
Chapter 4 - AT Commands, S-Registers and Result Codes
MT4X56USB 43
Command: T Tone Dialing
Values: P, T
Default: T
Description: Configures the modem for DTMF (touch-tone) dialing. Dialed digits are tone dialed until a P
command or dial modifier is received.
Command: Vn Result Code Format
Values: n = 0 or 1
Default: 1
Description: V0 Displays result codes as digits (terse response).
V1 Displays result codes as words (verbose response).
Command: Wn Result Code Options
Values: n = 0, 1, or 2
Default: 2
Description: W0 CONNECT result code reports serial port speed, disables protocol result codes.
W1 CONNECT result code reports serial port speed, enables protocol result codes.
W2 CONNECT result code reports line speed, enables protocol result codes.
Command: Xn Result Code Selection
Values: n = 0–7
Default: 4
Description: X0 Basic result codes (e.g., CONNECT); does not look for dial tone or busy signal.
X1 Extended result codes (e.g., CONNECT 46000 V42bis); does not look for dial tone or busy signal.
X2 Extended result codes with NO DIALTONE; does not look for busy signal.
X3 Extended result codes with BUSY; does not look for dial tone.
X4 Extended result codes with NO DIALTONE and BUSY.
X5 Extended result codes with NO DIALTONE and BUSY.
X6 Extended result codes with NO DIALTONE and BUSY.
X7 Basic result codes with NO DIALTONE and BUSY.
Command: Z Modem Reset
Values:
Default: None
Description: Z Reset modem to profile saved by the last &W command.
Command: &Cn Data Carrier Detect (DCD) Control
Values: n = 0 or 1
Default: 1
Description: &C0 Forces the DCD circuit to be always high.
&C1 DCD goes high when the remote modem’s carrier signal is detected, and goes low when the
carrier signal is not detected.
Command: &Dn Data Terminal Ready (DTR) Control
Values: n = 0, 1, 2, or 3
Default: 2
Description: &D0 Modem ignores the true status of the DTR signal and responds as if it is always on.
&D1 If DTR drops while in online data mode, the modem enters command mode, issues an OK, and
remains connected.
&D2 If DTR drops while in online data mode, the modem hangs up. If the signal is not present, the
modem will not answer or dial.
&D3 If DTR drops, the modem hangs up and resets as if an ATZ command were issued.
Command: &Fn Load Factory Settings
Values: n = 0
Default: None
Description: &F0 Load factory settings as active configuration.
Note: See also the Z command.
Vedere la pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 95 96

Commenti su questo manuale

Nessun commento

Panasonic CF-19RHRCHPG manuali

Manuali dei proprietari e guide per l'utente per Notebook Panasonic CF-19RHRCHPG.
We fornisce 1 manuali pdf Panasonic CF-19RHRCHPG per scaricare gratuitamente in base al tipo di documento: Scheda Tecnica






Più prodotti e manuali per Notebook Panasonic

Modelli Tipo di Documento
CF-31ATNEXPG Scheda Tecnica   Panasonic Toughbook CF-31, 2 pagine
CF-C1BTCFZFF Scheda Tecnica   Panasonic Toughbook CF-C1, 2 pagine
CF-T8GWESZQG Scheda Tecnica   Panasonic Toughbook CF-T8 SU9400, 2 pagine
CF-F8EWDZZNG Scheda Tecnica   Panasonic Toughbook CF-F8, 2 pagine
CF-19ADNAXDE Scheda Tecnica   Panasonic Toughbook 19, 2 pagine
CF-52EKMBUAG Scheda Tecnica   Panasonic Toughbook CF-52, 2 pagine
CF-H1CDMAZH3 Scheda Tecnica   Panasonic Toughbook CF-H1 Z540, 2 pagine
CF-19KHRCHPG Scheda Tecnica   Panasonic Toughbook CF-19 SU9300, 1 pagine
CF-19CHBAXBG Scheda Tecnica   Panasonic Toughbook CF-19, 1 pagine
CF-F8GWEZFQG Scheda Tecnica   Panasonic Toughbook CF-F8 SP9400, 2 pagine
CF-52CCABJBG Scheda Tecnica   Panasonic Toughbook CF-52, 2 pagine
CF-T5LWHSZBE Scheda Tecnica   Panasonic Toughbook Toughbook-T5, 2 pagine
CF-C1ATAAGFF Scheda Tecnica   Panasonic Toughbook C1, 2 pagine
CF-W8GWEYZSG Scheda Tecnica   Panasonic Toughbook CF-W8 SU9300, 2 pagine
CF-52GCMBVAG Scheda Tecnica   Panasonic Toughbook CF-52, 2 pagine
CF-Y7DWAZFSG Scheda Tecnica   Panasonic Toughbook CF-Y7, 2 pagine
CF-31MK5 Istruzioni per gli Interventi     Panasonic Toughbook 31, 44 pagine
CF-W5LWSYZBE Scheda Tecnica   Panasonic Toughbook Toughbook-W5, 2 pagine
CF-54A0002BM Scheda Tecnica   Panasonic Toughbook 54, 2 pagine
CF-Y5LWVYZBE Scheda Tecnica   Panasonic Toughbook Toughbook-Y5, 2 pagine