Multitech MTCBA-G-GP-F1 Scheda Tecnica Scaricare il pdf (Pagina 14)

Chapter 2 – Setup and Configuration

Multi-Tech Systems, Inc. MultiModem Wireless EDGE, GPRS, and CDMA Modems with GPS (S000376A) 14

2. Hardware Setup

1. Using an RS-232 cable, connect a workstation to the GPS connector on the MultiModem.

2. Attach both antennas (included in your ship kit). The GPS antenna is a 50 ohm SMA antenna. The

GSM/ CDMA antenna is a standard SMA antenna.

3. Plug one end of the power cord into the device and the other end into a live power outlet. The PWR

LED lights up.

Warning: Do not connect your wireless modem directly to a vehicle’s battery

for your power source. Doing so may cause power spikes. If you wish to use

the battery as a power source, add a filtering device to the DC input.

3. Verify the GPS Connection

The workstation should be running a utility, such as iQ_Monitor, to monitor GPS satellite signals.

iQ_Monitor is included on the product CD with the MultiModem Developer’s Kit.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 24 25

Nessun commento

Multitech MTCBA-G-GP-F1 Scheda Tecnica Pagina 14