
ID Symptom WorkaroundKeywords
061096s A call on a wireless endpoint routed via AAR/ARS over a
trunk group that uses a private number format does not
display the caller's information correctly.
Contact your technical support organization. Request
and apply patch 11744 or any later patch that includes
11744.
Related document: PSN000756.
Wireless,
Displays, AAR &
ARS, X-Mobility
DECT, EC500,
Routing, Trunks
060991s
Trunks for IGAR (Inter Gateway Alternate routing) public
network IGCs (Inter Gateway Connections) might lock in
the active state. They are not torn down after a call
completes when used in a “always on” configuration.
Contact your technical support organization. Request
and apply patch 11717 or any later patch that includes
11717. This patch implements an audit that tears down
active calls found in the problem state.
Related document: PSN000748.
Trunks, Routing
060940s
If a Toshiba SIP Phone activates Send All Calls (SAC) for
another extension, it cannot deactivate SAC for that
extension after Communication Manager undergoes a
reset system 4.
Deactivate SAC from another endpoint, such as the
affected extension.
SIP, Forwarding,
Endpoints /
Appliances /
Telephones
060915s
If you attempt to administer ATM trunks on a G600 CMC
(Compact Modular Cabinet) media gateway, you receive
the error Circuit Pack Resides In Cabinet Type That Does
Not Support Fiber Links.
Contact your technical support organization. Request
and apply patch 11619 or any later patch that includes
11619.
ATM, Media
Gateway,
Administration,
Trunks
060889s
If two different acpsnmp logins are possible, which can
occur in rare circumstances after upgrading
Communication Manager, the command 'list logins' makes
a SAT session unusable.
Avoid the command 'list logins'.Administration,
Logins, SAT
060886s
Release 3.1.1 of SES (SIP Enablement Services) running
with Release 3.0.x, 3.1, or 3.1.1 of Communication
Manager does not update the MWI for a wireless SIP
endpoint correctly.
Roll back to your previous release of SES.MWI (Message
Waiting
Indicator), SIP,
Wireless,
Messaging /
Voice Mail
060729s
If you set the Emergency Extension Forwarding (Min) field
on the system-parameters features form to zero, an
analog endpoint which dials an emergency number
receives all subsequent trunk calls as priority calls.
Remove and re-add the extension for the affected
endpoint.
Emergency,
Analog Stations,
Endpoints /
Appliances /
Telephones
060679s
In a configuration where tones or Music on Hold are
administered, if a DCP endpoint calls an IP endpoint with
no Direct IP (shuffling) capability on a media gateway, and
the IP endpoint conferences another endpoint on the
same media gateway, the original caller and the
conferenced endpoint have no talkpath.
Activate Direct IP for the IP endpoint.Music On Hold,
Tones, Media
Gateway,
Conference,
Talkpath
060665s
If you administer multiple location routing using only
specific locations (that is, with no all-locations routing),
calls that attempt to use multiple location routing to go to
a X-Mobile wireless endpoint do not succeed. Such a call
generates denial event 1751: No AAR/ARS Route
Pat/Pref.
Administer at least one instance of all-locations routing.Wireless, X-
Mobility/DECT,
Endpoints /
Appliances /
Telephones,
Routing,
AAR/ARS
060657s
After a reset system 4, including an upgrade or migration,
a server with very large translations (containing a large
number of stations and a large quantity of data on the
form) might restart repeatedly while attempting to load
translations. This occurs if the translations take longer
than 2 minutes to load.
Contact your technical support organization. Request
and apply patch 11505 or any later patch that includes
11505.
Related document: PSN000694.
Administration,
System Resets,
Interchange,
Translations,
Upgrades
060629s
In an configuration with IP-connected port networks, a
service observer on a different port network from the
parties on the call being observed cannot hear the call
when in Listen Only mode.
Turn off Listen Only mode.Talkpath,
Service
Observing, Port
Networks, H.323
IP
060520s
If an agent on an IP endpoint puts a call on hold and
attempts to use the Consult feature of the IC Agent GUI to
call another agent, but then cancels the Consult attempt
for any reason, the call on hold drops.
Contact your technical support organization. Request
and apply patch 11423 or any later patch that includes
11423.
Related document: PSN000695.
Call Center,
Agent, Hold,
Blocked/Dropped
Calls, H.323 IP
Page 2 of 8Avaya Communication Manager, Release 3.1
Known Issues and Workarounds for the S8500 Media Server
© 19 May 2006 Avaya
Commenti su questo manuale