Multitech MTCBA-C-U Specifiche Pagina 127
- Pagina / 197
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Chapter 17 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 127
R-SCH Throttling Selection $QCTRTL
Description: This command is used to enable or disable mobile R-SCH throttling.
Values: <Val>
0: Mobile never throttles R-SCH
1: Mobile can throttle R-SCH as needed.
Note: Command only applies to SO 33 calls. This value is stored in NV. The default is 1. For MSM500, MSM5105,
and MSM5100 ASICs only.
Syntax: Command syntax: AT$QCTRTL=<Val>
Command Possible Responses
AT$QCTRTL?
Note: Display the current setting
$QCTRTL: 1
OK Note: Command is valid
AT$QCTRTL =?
Note: Display the range of values
$QCTRTL: (0-1)
OK Note: Command is valid
AT$QCTRTL =0
Note: Set value to 0
OK
Note: Command is valid
R-SCH IP Selection $QCMIP
Description: This command is used to enable or disable mobile IP.
The default value is carrier-specific.
Values: <Val>
0 Mobile IP disabled, Simple IP only.
1 Mobile IP preferred. In the initial MIP registration, if the network does not support Mobile IP, then the
mobile automatically reverts to Simple IP (force a PPP renegotiation by sending a LCP C-Req).
However, if a Mobile IP session is registered, and then enters a network that does not support Mobile
IP, the mobile will drop the session and inform the upper layers of the failure (for example, by
dropping DCD to a laptop).
2 Mobile IP only. The mobile will make data calls only when Mobile IP is supported in the network.
During a MIP session, if the mobile hands off to a network that does not support MIP, then the mobile
will drop the session and inform the upper layers of the failure (for example, by dropping DCD to a
laptop). This value is stored in NV. The default value is 0.
Note 1: When the AT$QCMIP value is changed to 1 or 2, this modifies the value of AT+CRM to 2. AT+CRM with a
value of 2 enables network model operation. Changing the value to 0 will reset the AT+CRM to its original
value.
Note 2: This change is not supported by DMSS 5105 Release 1.0 Commercial.
Note 3: When the AT$QCMIP value is changed to 1 or 2, this modifies the value of AT$QCMDR to 3.
AT$QCMDR=3 means that the mobile tries Service Option 33 when it is in a cdma2000 network that
advertises P_REV 6 or higher. When AT$QCMIP >0 and an attempt is made to set AT$QCMDR to less than
3, the mobile will return ERROR.
Note 4: When the AT$QCMIP value is set to 1 or 2, this changes the value of AT$QCPKND to 0. This means that
the mobile must see a dial string (such as ATDT#777) on the serial interface before it will originate packet
data calls. When AT$QCMIP >0 and an attempt is made to set AT$QCPKND to 1, the mobile returns
ERROR.
Note 5: This AT command is for test purposes only and should not be changed by the mobile phone user.
Syntax: Command syntax: AT$QCMIP=<Val>
Command Possible Responses
AT$QCMIP?
Note: Display the current setting
$QCMIP: 1
OK Note: Command is valid
AT$QCMIP=?
Note: Display the range of values
$QCMIP: (0-2)
OK Note: Command is valid
AT$QCMIP=0
Note: Set value to 0
OK
Note: Command is valid
- CDMA AT Commands 1
- Contents 3
- Chapter 1 – Introduction 9
- Terminology and Acronyms 10
- Chapter 2 – AT Command 13
- Features 13
- Attention AT 14
- Request IMSI +CIMI 15
- Capabilities List +GCAP 15
- Repeat Last Command A/ 15
- Phone Offline +CPOF 16
- Keypad Control +CKPD 17
- Clock Management +CCLK 17
- Ring Melody Playback +CRMP 17
- Ringer Sound Level +CRSL 18
- Subscriber Number +CNUM 18
- View Modem Timers +WTMR 19
- Chapter 4 – Call Control 20
- Hang-Up Command H 21
- Answer a Call A 22
- Remote Disconnection 22
- DTMF Signals +VTD, +VTS 23
- Automatic Answer S0 24
- Incoming Call Bearer +CICB 25
- Microphone Gain +VGT 26
- Volume Gain Control +VGR 26
- Echo Cancellation +ECHO 27
- TTY Mode +WTTY 28
- Chapter 5 – Network Service 29
- Band Preference +WBND 30
- Roam Preference +WRMP 31
- Change NAM Selection +WNAM 32
- Read Current NAM +WCNM 32
- Chapter 6 – SIM Card 35
- Operational Commands 35
- Enter PIN2 +CPIN2 36
- Change Password +CPWD 38
- Card Identification +CCID 38
- Chapter 7 – Short Messages 39
- Delete Message +CMGD 47
- Message Overwriting +WMGO 49
- Change SMS Status +WUSS 49
- Chapter 8 – Supplementary 51
- Services Commands 51
- Chapter 9 – Data Commands 55
- Cellular Result Codes +CRC 56
- Chapter 10 – V.24-V.25 58
- Set DCD Signal &C 59
- Set DTR Signal &D 60
- Set DSR Signal &S 60
- Back to Online Mode O 60
- Result Code Suppression Q 60
- DCE Response Format V 61
- Audio Loopback &T 61
- Echo E 61
- Save Configuration &W 62
- Chapter 11 – Phone Book 63
- Phonebook Read +CPBR 66
- Phonebook Search +CPBP 66
- Chapter 12 – Position 68
- Determination (GPS) 68
- IP Server Address +WMPC 73
- Chapter 13 - Specific AT 74
- Read GPIO Value +WIOR 78
- Write GPIO Value +WIOW 78
- Play Tone +WTONE 78
- Play DTMF Tone +WDTMF 79
- Hardware Version +WHWV 79
- Select Voice Gain +WSVG 80
- Status Request +WSTR 80
- Ring Indicator Mode +WRIM 81
- 32kHz Sleep Mode +W32K 81
- Software Version +WSSW 82
- CPHS Command +CPHS 83
- Reset +WRST 84
- Set Standard Tone +WSST 85
- Security PIN +WPIN 86
- Minute Alert +WMBP 87
- Chapter 14 - SIM ToolKit for 89
- RUIM Software Version 89
- Example: 91
- Chapter 15 – Provisioning AT 99
- Set IMSI +WIMI 100
- SID and NID +WSID 101
- Slot Cycle Index +WSCI 101
- Packet Dial String +WPDS 102
- Commit Changes +WCMT 104
- Read SID/NID Entries +WSNR 104
- Download PRL +DPRL 105
- Service Programming Example 106
- Chapter 16 – Extended AT 107
- Commands in IS707.3 107
- Select Pulse Dialing P 108
- Basic S-Registers S 108
- Error Control Report +ER 109
- Modulation Selection +MS 113
- V.18 Selection +MV18S 114
- Cellular Extension +CXT 115
- Configuration String +CFG 115
- Query Service +CAD 115
- Battery Charge +CBC 117
- Serving System +CSS 118
- Hang-up Voice +CHV 119
- Chapter 17 – Qualcomm 121
- Defined AT Commands for 121
- CDMA Operation 121
- Set DM Baud Rate $QCDMR 125
- SCRM’ing Selection $QCSCRM 126
- R-SCH IP Selection $QCMIP 127
- MIP Selection $QCMIPP 128
- Chapter 18 – TCP/IP App AT 133
- Commands 133
- Open Socket +WOSK 134
- Close Socket +WCSK 135
- Transmit Socket Data +WSTX 135
- Read Receive Data +WSRX 136
- Force Dormant Mode +WFDM 138
- IP Address Lookup +WDNS 139
- Display IP Address +WIPC 139
- PPP Session Status +WPPP 139
- Socket State Change +WSKS 140
- Received Socket Data +WSRX 141
- Socket Data Error +WSRE 141
- Chapter 19 – Reference 143
- Information 143
- Specific Error Result Codes 144
- Final Result Codes 145
- Intermediate Result Codes 145
- Parameters Storage 147
- TCP App Socket Status Events 150
- TCP App Socket Error Codes 150
- TCP App DNS Server Codes 150
- TCP App PPP Network Codes 150
- Phonebook UCS2 Unicode 152
- MuxLite Example 154
- Chapter 20 – Unsolicited AT 155
- Result Codes 155
- Key Press or Release +CKEV 156
- Mode Preference +COPS 158
- Incoming Call +CRING 158
- RxLev Indication +CSQ 159
- Incoming Call +RING 159
- Call Answered +WANS 159
- Call Connected +WCNT 160
- Call Ended +WEND 160
- Flash Indication +WFSH 161
- General Indicator +WIND 161
- Call Originated +WORG 162
- Roaming Indication +WROM 162
- Emergency Mode +WSOS 163
- Current NAM Change +WNAM 163
- Voice Mail Indicator +WVMI 164
- Power Save +WSPS 164
- Download PRL Status +DPRL 167
- Chapter 21 – AT Command 168
- Examples 168
- Incoming Voice Call 169
- Call Waiting 169
- Originate Data Call 169
- Originate Data Call Failure 169
- Short Message Examples 170
- GpsOne Examples 171
- AT Commands 175
- Read Message +CMGR 177
- List Message +CMGL 178
- Send Message +CMGS 179
- Facility Lock +CLCK 185
- Signal Quality +CSQ 185
- Boot URL +WBURL 187
- Trusted Domain +WTDMN 187
- Proxy Address +WDPXY 187
- IOTA Error +WOAE 188
- Please Retry +WOAR 188
- Display PRI Checksum +WSUM 189
Prodotti e manuali riguardandi Networking Multitech MTCBA-C-U
Networking Multitech MT5634ZBA-USB Guida Utente
(12 pagine)
(12 pagine)
Networking Multitech ZDX Series Guida Utente
(10 pagine)
(10 pagine)
Networking Multitech FaxFinder FF840 Specifiche
(116 pagine)
(116 pagine)
Networking Multitech CF220 Guida Utente
(12 pagine)
(12 pagine)
Networking Multitech MTCBA-G-UF1 Specifiche
(40 pagine)
(40 pagine)
Networking Multitech MT5600ZDXV Manuale Utente
(58 pagine)
(58 pagine)
Networking Multitech MT5634ZBAV Guida Utente
(47 pagine)
(47 pagine)
Networking Multitech FR2201 Guida Utente
(28 pagine)
(28 pagine)
Networking Multitech RF802EW Guida Utente
(28 pagine)
(28 pagine)
Networking Multitech MA220 Guida Utente
(80 pagine)
(80 pagine)
Networking Multitech MA100-1M Guida Utente
(71 pagine)
(71 pagine)
Networking Multitech FF200 Guida Utente
(169 pagine)
(169 pagine)
Viking Professional VESO527T manuels
Manuels d'utilisation et guides de l'utilisateur pour Fours Viking Professional VESO527T.
Nous fournissons des manuels en pdf 3 Viking Professional VESO527T à télécharger gratuitement par type de document : Guide d'installation, Manuel de l'utilisateur
Viking Professional VESO527T Guide d'installation (14 pages)
marque: Viking | Catégorie: Ovens | Taille: 1.88 MB |
Table des matières
Installation
10
(continued)
11
Viking Professional VESO527T Manuel de l'utilisateur (52 pages)
marque: Viking | Catégorie: Ovens | Taille: 1.80 MB |
Table des matières
Viking Professional VESO527T Manuel de l'utilisateur (12 pages)
marque: Viking | Catégorie: Ovens | Taille: 1.86 MB |
Table des matières
(continued)
10
Plus de produits et de manuels pour Fours Viking
| Modèles | Type de document |
|---|---|
| VDSC305-4B |
Manuel de l'utilisateur
viking range corporation, po drawer 956, greenwood,
28 pages
|
| VxxP Series |
Spécifications
Viking VxxP Series Specifications [en] [nl] ,
4 pages
|
| M0905VR |
Guide de dépannage
Viking M0905VR Troubleshooting guide,
20 pages
|
| VESO166SS |
Spécifications
Viking VESO166SS Specifications,
20 pages
|
| DFWD171 |
Manuel de l'utilisateur
Guía de instalación Viking,
8 pages
|
| RDSCE2305BSS |
Spécifications
Viking RDSCE2305BSS Specifications,
26 pages
|
| Professional VESO166 |
Manuel de l'utilisateur
F20241K SP.qxd:F20241J SP.qxd,
6 pages
|
| VGIC2454BSS |
Guide de dépannage
Viking VGIC2454BSS Troubleshooting guide,
20 pages
|
| Professional VESO130 |
Manuel de l'utilisateur
Viking Electric Oven Installation Guide,
12 pages
|
| Designer Series |
Manuel de l'utilisateur
VIKING - AJ Madison,
6 pages
|
| Professional VESO166 |
Manuel de l'utilisateur
Professional Performance for the Home™,
32 pages
|
| VGIC5304BSS |
Spécifications
Viking VGIC5304BSS Specifications [en] ,
22 pages
|
| VESO166SS |
Guide d'installation
Viking VESO166SS Installation guide,
8 pages
|
| VGSO100SS |
Manuel de l'utilisateur
Viking Vgso100ss Use And Care Manual,
20 pages
|
| VMOD240SS |
Manuel de l'utilisateur
Langley Clearance List,
5 pages
|
| DrawerMicro Drawer Micro Oven |
Manuel d'installation
Viking DrawerMicro Drawer Micro Oven Installation manual,
4 pages
|
| VISC5304BSS |
Spécifications
Viking VISC5304BSS Specifications,
28 pages
|
| DCIH3604 |
Manuel de l'utilisateur
File,
23 pages
|
| VxxP Series |
Manuel de l'utilisateur
Viking VPN Guide Windows XP,
12 pages
|
| VMOS205SS |
Manuel de l'utilisateur
Viking Smart Luxury Packages.,
9 pages
|
© 2020, manymanuals.it. Tutti i diritti riservati | 0.022 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale