Multitech MultiModem Cell MTCBA-C1 Guida Utente Pagina 88
- Pagina / 135
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Chapter 15 – Audio Commands
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C) 88
Initialize Voice Parameters +VIP
Description: This resets audio parameters back to factory default values for the currently selected audio path
(See +SPEAKER).
The following parameters are restored:
• Gain control (+VGR, +VGT)
• Speaker & microphone selection (+SPEAKER)
• Echo cancellation (+ECHO)
• Side tone selection (+SIDET)
• Digital gain (+WDGT, +WDGR)
• Microphone gain enable (+MGE)
• Loudspeaker volume level (+CLVL)
Syntax: Command syntax: AT+VIP
Command Possible Responses
AT+VIP OK
Note: Command valid
Audio Loopback &T
Description: This command is used to perform audio loop back of the current audio path. This command can
be used to validate the audio loop. This is a standard Hayes
®
modem AT command.
Syntax: Command syntax: AT&T<num>
Command Possible Responses
AT&T0 OK
Note: Audio loopback is off.
AT&T1 OK
Note: Audio loopback is on.
Values: <num>
0 Audio loopback of off.
1 Audio loopback for PCM interface is enabled.
2 Audio loopback for DSP interface is enabled.
3 Audio loopback for Remote End is enabled.
- CDMA-C1 AT Commands 1
- Contents 3
- Chapter 1 – Introduction 7
- Chapter 2 – AT Commands 8
- Overview 8
- Command Types 9
- Command Format and Syntax 9
- Input Command Syntax 10
- Other Syntax 10
- Output Response Syntax 10
- Parameter Defaults 10
- Unsolicited Message Syntax 11
- Attention AT 12
- Repeat Last Command A/ 12
- Echo E 12
- Bits +WUSLMSK 13
- Chapter 4 – Identification 15
- Commands 15
- Chapter 5 – Query Commands 17
- Chapter 6 – Global 18
- Configuration Commands 18
- Save Configuration &W 19
- Chapter 7 – Status Commands 20
- Chapter 8 – Communication 26
- Set Diagnostic Port +WDMX 27
- Set DCD Signal &C 27
- Set DTR Signal &D 28
- Set DSR Signal &S 28
- Automatic Answer S0 30
- Command Edit Character S5 31
- Chapter 9 – Call Control 33
- Hang-Up Command H 34
- Answer a Call A 34
- Incoming Call +RING 35
- Emergency Mode +WSOS 37
- Call Answered +WANS 38
- Call Connected +WCNT 38
- Call Ended +WEND 39
- Call Originated +WORG 40
- CPHS Command +CPHS 40
- Call Forwarding +CCFC 42
- Send DTMF Tones +VTS 44
- Chapter 10 – Network Service 45
- Signal Quality +CSQ 46
- Band Preference +WBND 49
- Service Indication +WSRV 50
- Roam Preference +WRMP 50
- Default Cell Band +WDCB 51
- Roaming Indication +WROM 51
- Chapter 11 – Provisioning 54
- Control Commands 54
- Excess SPC Failures +WLCK 55
- Download PRL +DPRL 56
- Commit Changes +WCMT 58
- Set IMSI +WIMI 58
- Slot Cycle Index +WSCI 60
- SID and NID +WSID 60
- Chapter 12 – OTASP / OTAPA 61
- Commit Successful +WOTC 62
- SPL Unlocked +WOTS 62
- NAM Download OK +WOTN 62
- MDM Download OK +WOTM 62
- IMSI Download OK +WOTI 63
- PRL Download OK +WOTP 63
- Chapter 14 – Short Message 70
- Service Control Commands 70
- Read Message +CMGR 71
- List Message +CMGL 72
- Delete Message +CMGD 73
- Chapter 15 – Audio Commands 79
- Microphone Gain +VGT 81
- Speaker Gain Control +VGR 82
- Digital Gain Receive +WDGR 84
- Echo Cancellation +ECHO 86
- Speaker Driver Gain +WSDG 87
- Audio Loopback &T 88
- Chapter 16 – Data Commands 89
- R-SCH Selection $QCMIP 90
- MIP Selection $QCMIPP 91
- Chapter 17 – TCP APP AT 98
- Chapter 18 – Sleep Commands 107
- Builds) 111
- Chapter 19 – Antenna 111
- Commands (Not for IP and GPS 111
- +WANTPOLL 113
- Auxiliary GPS Power +WANT 115
- Scenarios 118
- Call Processing 119
- Sending Binary Data 120
- TCP Socket Examples 121
- TCP Server Example 122
- ATZ, and AT&F 123
- Chapter 22 – CDMA 128
- Terminology and Acronyms 128
Prodotti e manuali riguardandi Networking Multitech MultiModem Cell MTCBA-C1
Networking Multitech CDMA Guida Utente
(32 pagine)
(32 pagine)
Networking Multitech MTA128NT Manuale Utente
(8 pagine)
(8 pagine)
Networking Multitech ISIHP-4U Guida Utente
(50 pagine)
(50 pagine)
Networking Multitech MTPSR1-202ST Guida Utente
(25 pagine)
(25 pagine)
Networking Multitech MVP 800 Guida Utente
(88 pagine)
(88 pagine)
Networking Multitech ISIHP-4U Specifiche
(44 pagine)
(44 pagine)
Networking Multitech MT5634ZBAV Guida Utente
(170 pagine)
(170 pagine)
Networking Multitech GFU19 Manuale Utente
(158 pagine)
(158 pagine)
Networking Multitech MT5634ZPX-PCl Specifiche
(36 pagine)
(36 pagine)
Networking Multitech MTSMC-G-F1 Specifiche
(52 pagine)
(52 pagine)
Networking Multitech GFU19 Specifiche
(18 pagine)
(18 pagine)
Networking Multitech MTC-C2 Guida Utente
(34 pagine)
(34 pagine)
Networking Multitech FaxFinder FF240 Guida Utente
(126 pagine)
(126 pagine)
Networking Multitech MTA128NT Manuale Utente
(6 pagine)
(6 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.064 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale