Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem rCell User Guide 31

PPP > Wakeup-On-Call Examples

112BU

Example 1 – Set Up the Ethernet Router to Activate on Incoming SMS Message

1. On the PPP > PPP Configuration screen, set up the following parameters:

PPP General

● Make sure that PPP is Disabled (the default).

● Make sure Dial-on-Demand is Disabled (the default).

● Set the Idle Time Out to the number of seconds you desire.

Authentication

● Your wireless service provider may require you to have a separate PPP Username and Password. If so, enter

them here. Note: If a username and password are required, your wireless provider would have given them to you

when you activated your account.

Modem Configuration

● Make sure your Dial Number is entered correctly: The Dial Number is *99***1#

● Enter your APN. The APN is assigned by your wireless service provider.

Example: AT+CGDCONT=1,"IP","Internet" The Example: AT+CGDCONT=1,”IP”,”Internet” needs to be removed.

Just the APN name needs to be entered in the APN field.

Submit

● Click the Submit button to save the changes made on this screen.

2. On the PPP > Wakeup-on-Call screen, set up the following parameters:

Wakeup-on-Call Configuration

● Select Enable for Wakeup-on-Call.

● Set the Time Delay. You can use the 10 second default.

● Enter the Init Strings so that the integrated cellular modem receives SMS.

Enter Wakeup Init String 1 as at+cmgf=1

Enter Wakeup Init String 2 as at+csms=1

Enter Wakeup Init String 3 as at+cnmi=2,2,0,0,1

Enter Wakeup Init String 4 as at^scfg=”URC/DstIfc”,mdm

● Click the Submit button to save these settings.

Caller ID Configuration

● Enter an SMS that you want added to the Caller ID list.

Note: Add the SMS message string into the Caller ID list. The SMS message string must not contain any spaces

between words. When the configured string matches the SMS message string, it will activate the Wakeup-on-Call

feature.

● Add

Button

Click the Add button to save each message as it is entered into the Caller ID list.

Caller Acknowledgement Configuration

● Enter a configured string (0 to 40 characters) that will be sent to the integrated cellular modem upon receiving a

valid Caller ID from the WAN.

Set the Wakeup Acknowledgement string configuration with the command at+cnma

● Click the Submit button to save the Acknowledgement Configuration.

You must click Save and Restart once you have completed and submitted all the screens on which you have made

changes. The device will save all the settings and reboot the PC.

113BU

Example 2 – Determine if the router Is Supporting Incoming Calls and Caller ID

1. On the PPP > PPP Configuration screen, make sure that PPP is Disabled.

2. On the PPP > Wakeup-on-Call screen, make sure that Wakeup-on-Call is Disabled.

3. Open a command prompt by clicking the Start button and selecting Run.

4. Type CMD to open the command window. Click OK.

5. When the command window opens, type Telnet 192.168.2.1 5000. This is the IP address of the router.

Note: 5000 is the port number.

5.1. Enter your username and password to login.

5.2.Enter an AT command to make sure you receive a response; i.e., OK.

5.3.Enter the Command AT+CNUM to determine the dial number of your router.

6. From another phone, call your router using the number identified in Step 5.3. This will let you know if the RING

message shows.

7. To enable Caller ID, enter the AT+CLIP=1 command on the command screen and make the call again to see if it

shows Caller ID information.

Notes:

● Step 5.3 must show the RING or CALLER ID information in order for the Wakeup-on-Call function to work.

● Some wireless providers might not provide caller ID information if you have only a data plan.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 66 67

Commenti su questo manuale

Nessun commento

Soundoff-signal UltraLITE Exterior Warning Bar 12 Module manuels

Manuels d'utilisation et guides de l'utilisateur pour Éclairage Soundoff-signal UltraLITE Exterior Warning Bar 12 Module.
Nous fournissons des manuels en pdf 1 Soundoff-signal UltraLITE Exterior Warning Bar 12 Module à télécharger gratuitement par type de document : Manuel de l'utilisateur

Soundoff signal UltraLITE Exterior Warning Bar 12 Module Manuel de l'utilisateur (5 pages)

marque: Soundoff-signal | Catégorie: Lighting | Taille: 0.17 MB |

Table des matières

12 MODULE EXTERIOR BAR

Plus de produits et de manuels pour Éclairage Soundoff-signal

Modèles	Type de document
UltraLITE Interior 4 Module	Manuel de l'utilisateur SoundOff Signal UltraLITE Interior 4 Module User Manual, 1 pages
UltraLITE Interior 8 Module	Manuel de l'utilisateur SoundOff Signal UltraLITE Interior 8 Module User Manual, 4 pages
UltraLITE Interior 12 Module	Manuel de l'utilisateur SoundOff Signal UltraLITE Interior 12 Module User Manual, 5 pages
TrafficMaster	Manuel de l'utilisateur SoundOff Signal TrafficMaster User Manual, 6 pages
TrafficMaster Split Arrow Bar	Manuel de l'utilisateur SoundOff Signal TrafficMaster Split Arrow Bar User Manual, 6 pages
Intersector Surface Mount	Manuel de l'utilisateur SoundOff Signal Intersector Surface Mount User Manual, 2 pages
Intersector Under Mirror	Manuel de l'utilisateur SoundOff Signal Intersector Under Mirror User Manual, 4 pages
nFORCE Surface Mount	Manuel de l'utilisateur SoundOff Signal nFORCE Surface Mount User Manual, 3 pages
GHOST Surface Mount	Manuel de l'utilisateur SoundOff Signal GHOST Surface Mount User Manual, 2 pages
GHOST Surface Mount(10-30 vdc)	Manuel de l'utilisateur SoundOff Signal GHOST Surface Mount(10-30 vdc) User Manual, 2 pages
Predator 2 Surface Mount Light	Manuel de l'utilisateur SoundOff Signal Predator 2 Surface Mount Light User Manual, 2 pages
Predator 2 Surface Mount Light ECE	Manuel de l'utilisateur SoundOff Signal Predator 2 Surface Mount Light ECE User Manual, 2 pages
LED3 Surface Mount (10-16v)	Manuel de l'utilisateur SoundOff Signal LED3 Surface Mount (10-16v) User Manual, 2 pages
LED3 Surface Mount (10-30v)	Manuel de l'utilisateur SoundOff Signal LED3 Surface Mount (10-30v) User Manual, 2 pages
Raptor Surface Mount	Manuel de l'utilisateur SoundOff Signal Raptor Surface Mount User Manual, 2 pages
Fusion Lite Surface Mount	Manuel de l'utilisateur SoundOff Signal Fusion Lite Surface Mount User Manual, 2 pages
Caprice-Intersector Compass Light	Manuel de l'utilisateur SoundOff Signal Caprice-Intersector Compass Light User Manual, 2 pages
Taurus-Intersector Compass Light	Manuel de l'utilisateur SoundOff Signal Taurus-Intersector Compass Light User Manual, 2 pages
Caprice-Ghost Compass Light	Manuel de l'utilisateur SoundOff Signal Caprice-Ghost Compass Light User Manual, 2 pages
nLINE Running	Manuel de l'utilisateur SoundOff Signal nLINE Running User Manual, 1 pages

Multitech MultiModem rCell Guida Utente Pagina 31

Commenti su questo manuale

Prodotti e manuali riguardandi Networking Multitech MultiModem rCell

Soundoff-signal UltraLITE Exterior Warning Bar 12 Module manuels

Soundoff signal UltraLITE Exterior Warning Bar 12 Module Manuel de l'utilisateur (5 pages)

Table des matières

Plus de produits et de manuels pour Éclairage Soundoff-signal