Multitech RF760 Manuale Utente Scaricare il pdf (Pagina 12)

Example 1 – LAN-to-LAN Fixed IP Addresses Using RF760/660/600VPN

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 12

Example 1 - Site B Configuration

Site B Configuration

Follow the same basic procedures as used for Site A.

Note that some parameters are different for Site B.

For detail related to each step, see Site A procedures.

Step 1 – Connect a workstation to the RouteFinder’s LAN port via Ethernet for Site B.

Step 2 – Use the same IP Address as used for Site A (Set the workstation IP address as 192.168.10.100)

Step 3 – Apply power to the RouteFinder and wait until you hear 5 beeps.

Step 4 – Bring up your Web browser on the workstation. At the Web browser address line, type the default Gateway

address: https://192.168.10.1

and press the Enter key.

Step 5 – Follow the Site A User Name and Password login instructions.

Step 6 – If someone else is already logged in to the RouteFinder, or if you were logged in recently, a message will ask

you: Do you want to log the user out?

Click the Yes Button.

The Login screen displays. Repeat step 5.

Step 7 – The Web Management Home screen displays.

Step 8 – Click on Wizard Setup. Enter information for Site B of this example.

a) Enter the Administrator Email Address (can be anything). (Example: admin@yourdomain.com)

b) Enter the Host name for the RouteFinder (can be anything). (Example: RF660VPN.Site-B.com)

c) LAN IP Address and Subnet Mask should already be set to the defaults. This should be acceptable for

Site B.

d) Enter the WAN IP Address. This is the PUBLIC STATIC IP address. (Example: 204.26.122.3)

e) Change the Gateway IP address; this is the IP address of the router that connects to the Internet.

(Example: 204.26.122.1)

f) Place a checkmark in the box for the Packet Filter Rule: LAN-ANY-ANY-ALLOW. This will enable this

rule.

g) Specify any changes to the passwords that you feel are necessary.

h) Click Save to save the settings you just entered.

i) A screen displays prompting you to save your changes. Click on OK.

j) A screen displays indicating your IP Address.

Step 9 – Click on Networks & Services > Network. The LAN IP network is already defined. This is the private LAN on

eth0 at Site B.

a) Define the IP network that is configured on the remote LAN port (the private LAN on eth0 at Site B)

by entering the following information.

For example:

Name = RemoteLAN

IP address = 192.168.2.0

Subnet mask = 255.255.255.0

b) Define the IP address that is configured on the remote WAN port (the public WAN on eth1 at Site B)

by entering the following information.

For example:

Name = RemoteWAN_IP

IP address = 204.26.122.103

Subnet mask = 255.255.255.255

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Commenti su questo manuale

Nessun commento

Multitech RF760 Manuale Utente Pagina 12

Commenti su questo manuale

Prodotti e manuali riguardandi Networking Multitech RF760