Multitech RF760 Manuale Utente Scaricare il pdf (Pagina 10)

Example 1 – Site A

Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) 10

10. Click on Networks & Services > Network. The LAN IP network should already be defined. This is the private

LAN on eth0 at Site A (not shown in this example).

a) Define the IP network that is configured on the remote LAN port (the private LAN on eth0 at Site B) by

entering the following information. After this information is entered, it is added to the Network/Host list on

this screen.

For example: Name = RemoteLAN

IP address = 192.168.10.0

Subnet mask = 255.255.255.0

b) Define the IP address that is configured on the remote WAN port (the public WAN on eth1 at Site B) by

entering the following information. After this information is entered, it is added to the Network/Host list on

this screen.

For example: Name = RemoteWAN_IP

IP address = 204.26.122.3

Subnet mask = 255.255.255.255

After this information is entered, it displays at the bottom of the screen.

RemoteLAN 192.168.10.0 255.255.255.0

RemoteWAN_IP 204.26.122.3 255.255.255.255

11. Click on Packet Filters > Packet Filters Rules.

The rule for LAN should already be present. Add the rule RemoteLAN – Any – Any – ACCEPT.

This allows the Remote LAN at Site B to access the RouteFinder and LAN at Site A.

After the rule is entered, it displays under User Defined Packet Filter Rules.

1 RemoteLAN Any Any ACCEPT

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Nessun commento

Multitech RF760 Manuale Utente Pagina 10