Multitech MTA128ST Manuale del Proprietario Scaricare il pdf (Pagina 39)

39-IWay Hopper

AT Commands/S-Registers

Command: !Z=n

Function: Rate Adaption Protocol

Values: n = 5, 6, 9, or 12

Default: !Z=6 (V.110)

Description: The !Z command selects the rate adaption protocol used to commu-

nicate with another terminal adapter. The local and remote terminal adapters must

be set to the same protocol for communication to take place.

!Z=5 V.120 protocol

!Z=6 V.110 protocol

!Z=9 ML-PPP protocol

!Z=12 X.75 protocol

4.1.4 Serial Port Configuration Commands

Use the following commands to control the interaction between the MTA128ST

and the computer that is connected to it.

Command: En

Function: Command Mode Echo

Values: n = 0 or 1

Default: E1 (Echo on)

Description: Normally, when you enter commands on the keyboard, the

MTA128ST echoes the characters back to the computer or terminal, where they are

displayed on the monitor. Use the E command to turn this feature on and off.

E0 Echo off

E1 Echo on

Command: L5 and L6

Function: List Active Profile

Values: n = 5 or 6

Default: none

Description: The L5 command lists the current operating parameters of your

MTA128ST. This information can be very useful when you are changing commu-

nications software or when you are changing default settings. ATL5 lists the AT

command parameters, and ATL6 lists the values currently stored in the S-Regis-

ters. (See section 4.1.5 for more information on S-Registers).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 116 117

Nessun commento

Multitech MTA128ST Manuale del Proprietario Pagina 39